Archive

Category Archives for "DIY"

How To Remove Wood Stain From Clothes

Woodworkers commonly use wood stains in creating new colors on their wood projects. However, wood stains can spill or splash on clothing, which leaves behind a wood stain, ruining fabrics and garments.

When it comes to wood stain formulas, they either come in oil-based or water-based formulas. Wood stain removal is virtually impossible once it dried and hardened.

With this being said, it is important to treating and remove the spill or spot before it dries out.

In this post, let’s learn how to remove a wood stain from clothes.

What are the Things You’ll Need for This Tutorial?

Before you take anything and rub to the wood stain in your clothing, you have to prepare what you need. Generally, you need to wash your garment using a color-safe bleach. Household remedies can also be used such as acetone or mineral spirits. You need gloves and mask if you are handling harmful chemicals.

What are the Steps to remove Wood Stain From Wood?

Step #1

Treating and washing the wood stain immediately is very important. The faster you get rid and wash the clothing with wood stain, the easier and more possible to remove it. If you find the wood stain has already dried, you can still wash it out., however, it might not be effective.

Image Source: https://media1.s-nbcnews.com/j/MSNBC/Components/Video/__NEW/2016-01-08T15-16-12-733Z–1280×720.760;428;7;70;5.jpg

Step #2

Do not rub the wood stain, otherwise, it will just make the stain bigger and it may just spread to other the parts of the garment. If you rub it, there’s a possibility of pushing the wood stain deeper into the fabric fibers. If you need to rub the wood stain, just rub the stained portion of the cloth against itself, leaving the unstained part of the fabric alone.

Image Source: https://img.wonderhowto.com/img/12/13/63567475108159/0/remove-almost-any-stain-using-alcohol.w1456.jpg

Step #3

Wear gloves when you are treating stained clothes. Wear protective rubber gloves to remove the stain so your skin and hands are protected with any harmful stain-removal products

Image Source: http://www.carpet-cleaner-london.co.uk/img/53/services/327/stain-cleaning.jpg?1447763880

Step #4

Pre-Treating Wood Stain and Spot-Cleaning

Check and test the stains on different parts of the clothing. If you’re trying out various cleaning techniques, you may ruin the entire garment. First, test the cleaning agent on a less visible part of the garment before applying to visible areas. Test on the inner part of a pocket or inside of the hem, most especially if you are planning to use mineral spirits or bleach to clean the stain.

Image Source: https://primereviews.org/wp-content/uploads/2014/10/Carpet-Stains.jpg

Step #5

Pre-treating the wood stain using a stain removal pen can also be done. Just simply press the tip of the stain removal pen directly on the wood stain, releasing the cleansing detergent, and holding the garment in both hands. Rub the stained part repeatedly.

Image Source: www.amazon.com

How to Remove Garment Wood Stain Using Mineral Spirits

Image Source: https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTqHH6HvZFruuhN236QmZkdSQNXszgtjH4nIH_zHJLPsbieVdxq

  1. Scrub the fabric with mineral spirits, which is a form of paint thinner by starting dampening a clean cloth.
  2. Rub the cloth with mineral spirits in a circular motion.
  3. Keep rubbing until you see the progress.

How to Remove Garment Wood Stain Using Acetone

Image Source: https://www.wikihow.com/images/thumb/b/b7/Get-Wood-Stain-Out-of-Clothes-Step-7.jpg/aid9606609-v4-728px-Get-Wood-Stain-Out-of-Clothes-Step-7.jpg

  1. Acetone can be used on a water-based stain spot. Pour an acetone onto the wood stain, then blot it with an acetone-soaked cloth or rag.
  2. Begin at the outer portion of the wood stain, moving your way inward.
  3. Place paper towels underneath the wood stain before applying the acetone. Doing so will help to soak the acetone and the wood stain from underneath, protecting the surface of what you are using to clean it.

Image Source: https://www.fabhow.com/wp-content/uploads/2017/03/before-after-use-acetone-to-remove-nail-polish-stain-from-fabric.jpg

How to Wash the Garment

  1. Let the stained clothing soak in a cleaning solution for 3 to 5 hours.
  2. Wash the stained garment separately and not to mix with other clothing.
  3. Set the laundry machine for a small load.
  4. Place the wood stained clothing in the laundry machine on a warm cycle. You can include a regular laundry detergent but no need to add additional cleaners.
  5. You can use 3⁄4 cup or 180 mL of bleach that is color-safe.
  6. Do not dry the stained garment not until the stain has been fully removed. Using the dryer will only work the stain further. Check the wood stain if it is completely gone before throwing the garment in the dryer or just let it air dried.

Image Source: https://images-na.ssl-images-amazon.com/images/I/61czZmfHF6L.SX355.jpg

Image Source: https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTIPPZdW_0lMGtT7MSc9qcqkaD7gK8Nzr3rhxFD4SUOUWM0mMnW

Conclusion

It is now easy to remove a wood stain from clothes with the availability of color-safe bleach. Never allow the wood stain to dry because it will be harder to remove it. Did you learn and enjoy reading? Great! Share and like this post and leave a comment below!

How To Join Wood Corners

Wood joinery is an important element of every woodwork project. A beginner or professional, it is important to know how to join wood corners.

In this article, we will tackle the top corner joints in woodwork today, to increase your understanding and knowledge for the best final outcomes of your wood project.

So, how do you join wood corners?

What are the types of joints and their uses?

Let’s get started now!

What You Will Need to Follow This Tutorial

The important things you need to prepare to join wood corners are a miter saw, glue, screws, clamp, measuring tool, and the wood or board you need to join. Preparing these tools and materials before you start your project will definitely save your time and effort.

How to Join Wood Corners with a Dovetail

Dovetail is the hallmark of strength and craftsmanship. A dovetail joint can be cut by machine, by hand, or a combination of both. A dovetail corner joint has different types, but the most common include half-blind and through. It has a superior tensile strength or resistance from being pulled apart.

Image Source: http://www.startwoodworking.com/sites/default/files/uploads/1/1051/dovetails%201.jpg

The dovetail joint connects the sides of a wood drawer to the front using a series of pins that are cut to extend from the board’s one end interlocking with a series of tails that are cut into the end of another board forming a trapezoidal shape.

Image Source: https://homeimprovementwarehouse.files.wordpress.com/2011/05/dovetaildrawerdetail.jpg

The joint is permanent once glued, requiring no mechanical fasteners. Because of its tensile strength, some people are using the dovetailed dado.

Image Source: https://previews.123rf.com/images/paitoonpati/paitoonpati1608/paitoonpati160800015/60680387-type-of-wood-joint-set-dovetail-dado-style-perspective-3d-with-top-front-side-and-back-view-isolated.jpg

How to Join Wood Corners with a Dowel or Butt Joint

This joint is a simple, yet a very strong joint that can be created to hide or expose the dowels. You can strengthen a basic butt joint with hidden fluted dowels that are drilled, inserted, and cut flush. A butt joint is a relatively easy woodworking joint that joins two wood pieces by just butting them together.

Image Source: https://homemade-furniture.com/wp-content/uploads/butt-joint-reinforcements.jpg

It’s the weakest wood joint, so you may want to use reinforcement. Glue doesn’t provide a tough lateral strength and this woodworking joint is easily broken with bare hands.

Image Source: http://www.craftsmanspace.com/sites/default/files/free-knowledge-articles/edge_to_face_dowel_joint.gif

How to Join Wood Corners with a Miter Joint

Miter joints include simple miter, miter with a spline, miter with hand-cut keys, and miter with machine keys.

Image Source: http://www.craftsmanspace.com/knowledge/construction-of-a-miter-woodworking-joint.html

A simple miter is recommended for joints that are not requiring too much strength. This is easy to cut and assembled using a masking tape. It is uncluttered and looks simple. A miter with spline adds extra strength with a groove cut close to the inside of the joint as close as possible, so that the ends of the spline do not weaken the joint’s outer edge.

Image Source: http://www.startwoodworking.com/sites/default/files/uploads/1/1616/miter-joint-lead.jpg

With a miter having machined keys, adding a dovetail or straight keys into the edge is done after machining and assembling a basic miter joint. The recesses created are the areas where the keys are glued. The look is powerful if the keys will be made of contrasting materials.

Image Source: https://cdn8.bigcommerce.com/s-butomjmq7q/images/stencil/500×659/products/30/113/hoffmann-dovetail-key-w4-pillar-facade-joints__15271.1511635237.jpg?c=2

A miter with hand-cut keys is flexible. After cutting, you can glue and insert the strips of veneer.

Image Source: https://www.familyhandyman.com/wp-content/uploads/2017/05/FH10APR_TIGMIT_06.jpg

How to Join Wood Corners with a Rabbet and Dado

The rabbet and dado are simple and reasonably strong joints that are usually created on a table saw. Cut across one side is a groove that is no bigger than 1/3 of the width and depth of the thickness of the wood with the thinnest piece.

Image Source: https://iiklo.info/wp-content/uploads/rabbet-vs-dado-d-blades-versus-router-bit-joint-26-f-1-key-startling-share-this-post.jpg

Machined on the end is a mating tenon by cutting a dado at the end. When a rabbet is viewed in a cross-section, it is open and two-sided to the end of the surface. A good example of using rabbet is the back edge of a cabinet. The back is fit flush with the wood sides.

Image Source: https://www.canadianwoodworking.com/sites/default/files/assets/images/rabbetsdadosgrooves_illustration3.jpg

How to Join Wood Corners with a Biscuit Joint

A biscuit joint is a reinforced butt joint, with an oval-shaped piece. It’s made of compressed and dried wood, like beech. You can install a biscuit joint in matching mortises. Majority of woodworkers use a biscuit joiner for making mortises. Designing the biscuit joint is done to allow a greater flexibility in gluing up.

Image Source: https://www.canadianwoodworking.com/sites/default/files/assets/images/biscuitjoinersplinejig_1_0.jpg

Conclusion

Now, you are more knowledgeable in joining wood corners to complete your wood projects. There are different ways to join wood corners with these joint techniques discussed above, with varying strength and purposes. Of course, it is important to know the requirements of your project to ensure success. Do you find this post helpful? Great! You can like and share this post with your family and friends. You may also leave a comment below. Happy woodworking!

How To Inlay Turquoise In Wood

Using turquoise as a centerpiece of a wooden piece is indeed a fantastic project. Crushed turquoise can make beautiful wood inlays.

You can place it in natural cracks and checks, into tunnels, grooves or simply on the center or at the top of the wooden base.

There are many techniques to do this and this guide will help you with some very simple steps.

Steps to Inlaying Turquoise in Wood

You can work with fake or genuine turquoise stones however each one requires a special technique to inlay in wood. Fake gems are made of glass or acrylic and labeled as fake, reconstituted or even turquoise for inlay.

Meanwhile, genuine turquoise is hard and may even be harder to work with. Real turquoise is very expensive and labeled Kingman or Sleeping Beauty turquoise.

Things you will need

  • Wood base
  • Turquoise piece
  • Gem Glue
  • Sandpaper
  • Knife

Simple inlaying steps to inlay turquoise

Step #1

Choose the wooden material that you want to inlay. It could be any kind of wooden pieces like a souvenir item, wooden jewelry box or a guitar. For your inlay, it is recommended that your turquoise stone should be flat so it would be easy to inlay.

Source: https://woodworkjunkie.com/diy-curved-inlays-for-better-chopping-board-designs

Step #2

Shape the inlay into a simple form so it would be easier to work with. Cut the turquoise using a sharp knife or a router. Place the piece on the base. Use a double-sided tape or glue that takes longer to set. This way, you will be able to trace the form of the turquoise on the base.

Source: https://www.pinterest.com/pin/480055641501358462/?lp=true

Step #3

Trace the inlay on the base using a sharp pencil. With the use of a sharp knife, cut into the traced lines. There are many kinds of knives to use and one of the best ones for inlaying is an X-Acto knife or a sharp hobby knife.

Start by lightly scoring the wood to be able to create a groove in the wood. Run the knife deeper in the wood this way, you can cut the grooves better with a lesser risk of the knife slipping along the surface of the wood and damaging nearby areas.

Source: https://www.kjons.com/products/knives-money-clips/mokume-gane-pocket-knife-with-damascus-steel-blade-and-inlaid-with-cocobolo-wood/002145

Step #4

Remove wood from the groove just deep enough to accommodate the turquoise piece. Fit the inlaid piece when you are nearly done. If the groove you made end up slightly shallow, sand the inlaid piece down.

If the inlay looks deep then you must sand the entire wooden surface to create a flushed appearance. Remove the turquoise and cut the wood underneath it.

Use simple hand tools like a router plane, chisel, or sharp knife. You can also use a laminate trimmer or a router to help you make precise recesses in wood without a sweat.

Source: https://www.youtube.com/watch?v=AXYC3OGOC5U

Use sandpaper to smooth out the recessed area. Use sandpaper to flatten the base and the edges of wood as well after most of the wood from the groove has been removed.

Make sure that the pieces fit before moving to the next steps of the project. This is a very crucial step so do not hurry.

Step #5

Sand the edges of the inlay to make a wedge narrower at the bottom than at the top. A fine grit sandpaper will work best for the inlay. Now that you are sure that your turquoise inlay will sit perfectly flushed in the groove, it’s time to prepare the glue.

You may want to mix this with wood dust to cover any gaps between the inlay and the wood. Doing this will also help create a look that the turquoise is a part of the wooden base all along.

You can use any kind of wood glue for as long as it can hold the size of your turquoise stone. Follow the manufacturer’s instructions to prepare and cure glue or epoxy to use.

Source: https://www.pinterest.com/pin/442900944594463687/?lp=true

Step #6

Apply glue or epoxy on the back of the turquoise inlay and stick it on the groove or recessed area. Lightly tap the inlay and the wood to help the two pieces stick together. Make the final adjustments. Clean any excess glue between the inlay and the wood.

Source: https://www.walmart.com/ip/Gem-Tac-Permanent-Adhesive-4-oz/24855620

Conclusion

Turquoise has very striking colors that make it a good inlaying material for a wooden base. It is easy to inlay stones when you have the right base material, the best tools, and the know-how.

You can make great wooden souvenir pieces and other decorative items when you know how to inlay items on wood.

How To Make Wood Look Old With Vinegar

For those of you who love experimenting with all-natural, cheap, easy, and eco-friendly DIY gigs, here’s something we bet you will adore! How to make wood look old with vinegar? That’s what we are talking about!

First things first, there are 2 major ways to utilize vinegar in order to give the wood a beautiful rustic touch.

The first one is to mix a steel wool and vinegar solution which works like charm. However, we decided to focus on the less time- and money-consuming option.

And so below, we are revealing method number 2: aging wood with baking soda and vinegar. Why we love this particular technique? Because you already have everything you need in your household.

However, we do enjoy the steel wool and vinegar method, too. Keep in mind that even though it takes several days before the steel wool reacts with vinegar to let you use the solution, once done it can store for up to a year!

Now, let’s quit any distractions and focus on the awesome tutorial we have compiled for you!

What You Will Need To Follow This Tutorial

  • Baking soda and white vinegar
  • Wire brush and paint brush
  • Bucket, water, and rags

A Quick Pro Tip

Did you know that you can take advantage of balsamic vinegar to make wood look old? Personally, I love making a combination of the 2! Once I go over the surface of the wood with the baking soda and water mixture, I apply a bit of apple cider vinegar to the edges and corners and use balsamic vinegar to make slightly nuanced strokes at the very center.

The difference isn’t too obvious but that’s exactly what I adore about it! Plus, if you try the steel wool and white vinegar distressing wood technique, you can make 2 mixtures by using balsamic vinegar, too!

Step by Step Instructions for Making Wood Look Old With Vinegar

Step 1 – Mix the water and baking soda solution and start applying it

Image Credit: radmegan.com

The solution will work best on bare, untreated wood. However, if you are dealing with finished wood, you will need to sand off the top coat thoroughly using sandpaper with a suitable grit.

The proportions of the solution are pretty straightforward: you want to mix 1 part of water with 1 part of baking soda in a bucket (or any other container you prefer). Stir well but avoid overdoing the whole thing.

At first, you need to go over the surface of the wood by applying predominantly water. This will help to prepare the wood to react better with the layer of soda. Next, you want to apply a thick layer of the undissolved soda at the bottom of the bucket. Leave the excess water behind by pressing the paintbrush against the edge of the container.

Step 2 – Proceed with applying vinegar

Image Credit: bunnings.com.au

Let the water and soda coat dry out for approximately 10 minutes. Afterward, you can apply the vinegar to speed up and maximize the reaction. You can sprinkle the vinegar directly from the bottle.

However, if you have a spray bottle handy, it will be easier to control the process of spreading the vinegar evenly. Don’t worry if you miss a particular spot, though. One of the best things about aging wood is that you don’t have to strive for perfection!

Allow the reaction to take place for up to 30 minutes (but not more!). Use a wire brush to remove the color of the wood surface which comes off along with the tannins (the natural wood pigments that react with the baking soda solution).

Go over the entire surface carefully with water and a clean rag until no more color remains intact on your rag. If needed, you can repeat the same process the next day to remove more color.

Have you tried the baking soda wood aging technique before? We’re always eager to hear more from our DIY fellows out there. After all, we believe that only together we can make this world a better place.

Don’t you agree we are lucky to live in the era of open communications? Just a century ago, you and I wouldn’t have been able to exchange these awesome tips and tricks if it wasn’t for the miracle of the Internet!

Show us some support by liking and sharing this article to help us spread the good vibes of accessible DIY tutorials.

How To Join Two Wood Pieces With Screws

Screws are used to join two pieces of wood and this is a basic part of woodwork or carpentry. Doing this task excellently produces a professional looking end result.

It is important to choose the right size of the screw when you are dealing with two different wood pieces. If it’s too long, it’ll come through the wood surface of the second piece, thus ruining the finish.

On the other hand, if it’s too short, it won’t be strong enough.

In this article, we will tackle how to join two pieces of wood with screws to help you gain enough knowledge and apply it to your next woodwork project involving wood joinery using screws.

What You’ll Need to Follow this Tutorial

The important things you’ll need to prepare for this woodwork task includes wood pieces, screws, drill bit, drill, pencil, screwdriver, and carpenter’s measuring tool.

How to Calculate the Length of the Screw

When calculating the correct length of the screw, you need to measure the depth of the wood top piece, and adding the half depth of the bottom wood piece to it. It means that the screw will go through the top wood piece and only halfway through the bottom part.

Image Source: http://www.handymanknowhow.co.uk/drillingandfixing/pilotholeswithtext.jpg

How to Join Two Wood Pieces With Screws

Step #1

Using a pencil, make a cross at the center point where you want to screw and fix the two wood pieces together.

Image Source: http://www.ripsdiy.co.za/graphics/woodbutjoin.jpg

Step #2

Using a drill bit should be of similar size width the screw. It should not be bigger, otherwise, the screw won’t grip hold the wood securely.

The next step is drilling right through the upper piece, beginning at the point you’ve made with your pencil.

For taking the screw, use a smaller drill then make a narrow pilot hole at the bottom wood piece. Drilling too far down is not advisable, just drill far enough to start the screw.

Image Source: https://i0.wp.com/handycrowd.com/wp-content/uploads/2012/06/screw-holes-explained-in-detail.jpg

Step #3

If you are planning to use countersunk screws with shaped head or top that goes down into the wood surface, fitting your drill using a countersunk bit is essential to give you a space to sink the head when the screw is being fixed.

Image Source: https://images-na.ssl-images-amazon.com/images/I/51H9zNxZ0kL.SL1050.jpg

Step #4

It is easy to make pilot holes in the second wood surface. However, if the size of the screw is more than size 6, you need to use a drill bit.

When you’re screwing two wood pieces together, it’s essential that all screws are equally tightened up to prevent twisting due to unevenly spread tension.

Image Source: https://images.woodmagazine.mdpcdn.com/sites/default/files/styles/width_550/public/image/migrated//wood/images//475_2_1.gif

Tips and Tricks When Joining Two Wood Pieces With Screws

Tip #1

Choosing the right screws for a woodworking job is not easy, most especially if you’re not an expert. Keep in mind that not all screws are compatible with wood.

The most commonly used screw for wood projects is a countersunk screw (cross-slot head), By using the correct screwdriver to fix these screws, it won’t slip and damage wood surface. Pozidriv screws enable you to use 3 sizes of a screwdriver and are usually specially hardened.

Tip #2

If you’re screwing two pieces of chipboard or fiberboard together, you need to use special chipboard screws with deep-cut sharp-edged threads to go all the way down the screw shank, for strength and good grip. You can also use it to fasten wood.

Tip #3

It is important to use pilot holes when you’re using wood screws if you want the screws to go through straight. This is done with the help of a bit which is smaller as compared to the screw diameter, creating a channel so that the wood screw can easily follow.

For hardwood, create pilot holes that are equal to the size of the thread of a screw.

Tip #4

It’s very important to use the correct length of wood screws and they should be up to code.

Tip #5

Coating the wood screws of hardwood with soap or beeswax is a good idea to help the wood screw go into the wood smoother and faster.

Tip #6

Place the wood screws on a flat metal piece and use a hammer to bend the threads slightly down to prevent loose screws.

Conclusion

Wood screws are designed and specially treated for wood pieces, creating a stronger fit for a long-lasting fit as compared to generic nails or screws. It takes some practice using these special wood screws.

How To Join Two Pieces of Wood at Right Angles

For any wood project, joining two wood pieces is an important aspect to achieve stronger and more beautiful woodwork. But, how to join two pieces of wood at right angles?

While the butt joint is considered the most basic method of joining wood pieces, it is not that appealing as compared to other types of joints because the end grain of one board is visible.

What is your best option?

In this article, we’ll share with you the best method you can use to join two wood pieces at right angles.

What You Will Need to Follow This Tutorial

The things you need to prepare to join two pieces of wood at right angles include a compound miter saw, glue, screws, clamp, measuring tool, and the wood or board you need to join. Preparing these beforehand will definitely save your time and effort.

Why use a Mitered Butt Joint?

For a more attractive option, you can try using a mitered butt joint. While it will not be any stronger as compared to a standard butt joint, it’s certainly more aesthetically pleasing to the eyes because you will not see the wood board end grain.

Image Source: http://jansson.us/jcompound.html

An important aspect when it comes to making a mitered butt joint is cutting the angles precisely. To make these angled cuts, a compound miter saw is your best tool. The first step in cutting a good mitered butt joint is to determining the final joint angle and dividing that number by two.

Image Source: http://www.craftsmanspace.com/sites/default/files/free-knowledge-articles/various_miter_joints.jpg

You will need to create a 45-degree angle cut for a square connection or 90-degree angle, on each of the boards needing to be joined. The two cut ends must match up perfectly if the two stock pieces are of the same width.

Image Source: http://www.garymkatz.com/trimtechniques/open_miters.html

Mitered butt joints are also used when creating other angled joints. For instance, if you’re creating an octagon-shaped picture frame, the angles of each of the eight sides must be 45 degrees rather than 90 degrees, so you need to cut 22 1/2-degree angles on every end to make the butt joints.

Why Use Glue to Hold the Joint?

A wood glue provides most of the strength to hold the joint. Both sides of the woodworking glue joint will be on the porous end grain, so you’ll likely need to use more glue as compared to gluing on a side grain. Before you apply glue, make sure to dry-fit your wood pieces for a proper and perfect fit.

For example, if you are making a picture frame, cutting all the angles and lengths and placing the pieces into place on your work table should be done.

Image Source: www.yourstreetgiftcards.com

After which, cross-check the picture frame for squareness, making sure that the joints don’t have gaps before you apply the glue.

Image Source: http://www.craftsmanspace.com/sites/default/files/free-knowledge-articles/miter_joints_errors.jpg

Why Use Mechanical Fasteners?

When using a woodworking glue for holding a mitered butt joint, there is not a lot of strength. You can strengthen the join using finish screws, nails, and brads for the joint’s lateral strength.

When using a finish brad or nail in securing the joint, you need to apply a glue to the joint. After which, secure it using a woodworking clamp.

Image Source: https://images.slideplayer.com/26/8755645/slides/slide_8.jpg

Use a pneumatic finish nailer or a brad nailer to drive the fastener through the face of the board into the end of the other board that adjoins in the joint.

Drive another nail into the joint to follow up through opposite board’s face into the end grain of the other board. If you use hardwood, it is important to pre-drill before the screws are installed. This is to avoid splitting.

Image Source: www.homedepot.com

How to Join Wood at a 90-degree Angle

A 45-degree miter is done by applying glue to mitered corners. Laying one board on the back between two clamps is the next step. Take the other board and then join the mitered corners where you applied the glue.

The two clamps should be lightly tightened and slide the joined wood pieces to the edge. Lightly clamp the other board to the table with the use of the other two clamps.

Image Source: https://s22293.pcdn.co/wp-content/uploads/7252-GLUING-MITERS_5F00_21.jpg

Next, verify the two boards’ alignment. When the two boards are aligned correctly, you can tighten the clamps equally. For edge to edge, apply glue beads to the edge of the initial piece and lower side of the next piece. Using two clamps, lay the first wood piece on the back.

Image Source: https://s22293.pcdn.co/wp-content/uploads/7252-GLUING-MITERS_5F00_51.jpg

The second piece stands upright for the glued surfaces to face each other. The two pieces slide together and the edges of the boards should be aligned. Next, tighten the clamps.

Conclusion

There are two ways to join two wood pieces at a 90-degree angle. One is creating a 45-degree miter for a seamless joint and the edge to edge. We hope you learned something from this post. If you find this article helpful, you can like and share this post and leave a comment below.

How To Make Wood Look Rustic With Paint

Ah, the unique beauty of weathered wood! The very picture of rustic wood makes we fall into a dreamy, happy state of pure bliss.

Do you also feel your senses celebrating every time you admire the looks of aged wood?

Do you have a passion for easy, inexpensive and creative DIY project and ideas?

Do you want to learn how to make wood look rustic with paint?

Then you are exactly where you should be right now!

Follow the step by step instructions we are revealing below and embrace our team’s top favorite tutorial on making wood look rustic (with paint).

What You Will Need To Follow This Tutorial

  • Milk paint (2 colors)
  • Chip brush (mind that natural bristle brushes will do better, though)
  • Fine-grit sandpaper (optional)
  • Water
  • Rag
  • Burnishing paste (or Polycrylic finish)

Pro Tips

1 – Consider the rustic look you want to achieve

As this technique requires the application of two colors, you need to decide how to match these tones best. For a more stylish, subtle effect, go for 2 similar tones such as light gray and dim gray.

If you want to create some more impressive and eye-grabbing, experiment with contrasting colors. For example, basil green and pink salmon can make a spectacular combo. Just keep in mind that the underlying coat will be the less visible one, as it will show off only on the “worn out” areas.

2 – Choose a suitable finish to complement the rustic effect you’re looking for

On the one hand, you have burnishing paste. Burnishing paste creates a no-gloss effect on the surface of the wood. Although there are low-sheen burnishing pastes available, the gloss is very minimal; in fact, it’s only a slight luster imparted. On the other hand, you have a Polycrylic finish. Go for this type of finish if your aim is to get a satin-like or high gloss, durable protective coat.

Step by Step Instruction for Making Wood Look Rustic With Paint

Step 1 – Apply the basic coat of milk paint

Image Credit: realmilkpaint.com

As mentioned above, the basic (aka underlying) coat of milk paint will show off only once you sand the surface of the wood after applying the second coat (aka the top coat) of paint. Using a paintbrush, proceed with the application of the basic coat following the grain of the wood.

Let it dry for approximately 2 hours but make sure you first read the instructions on the type of paint you are working with. Once the first layer has dried out thoroughly, you can lightly sand the whole surface with fine-grit sandpaper.

Don’t be aggressive, though; just smooth out any uneven patches gently.

Next, apply a second coat of the underlying color. Now, you want to let it dry overnight until it hardens completely.

Step 2 – Apply the top coat of milk paint

Image Credit: apieceofrainbow.com

After the 2 basic coats are thoroughly dry, it’s time to proceed with applying the top coat. It is crucial not to hurry to apply the top coat. If you don’t let the underlying coat harden overnight, the colors can get mudded.

Apply a single layer of top coat, making sure you follow the grain of the wood. Let the top coat rest and dry overnight.

Step 3 – Distress the wood and add the final touches

Image Credit: canadianwoodworking.com

Rise up and shine! You can start distressing the wood. Go over the areas you want to distress with a damp rag (make sure it’s only damp and not soaking wet!).

Rub until you get the rustic effect you are looking for. If you want a more dramatic weathered effect, you can also go over the areas you want to “wear out” with sandpaper. Finish the piece with burnishing paste or a Polycrylic topcoat.

Image Credit: mustardseedinteriorcraftsmanship.com

Did we manage to inspire you to try out the awesome two-tone technique for making wood look rustic? I dare to say that this is, by far, one of the most fantastic methods I have tried out. And I have been through multiple experiments for getting those lovely rustic looks through painting on top of a wood surface.

Will you follow the tutorial for your next DIY project? If you enjoyed this article, don’t just pass by. Like and share this content to help us reach out to more of our fellows DIYers. We’d love to hear more from you in the comment section below.

How to Get Musty Smell out of Wood

Are you looking for great and effective ways on how to get the musty smell out of wood? This is your lucky day since this article is all about giving you tips and tricks on how you can get rid of the musty smell out of wood.

It is important that we avoid the musty smell of wood since it is unpleasant and at the same time it carries or harbors mold.

Aside from getting rid of the musty smell, it is also essential that we exterminate the fungi or molds that cause it to spread and transfer to your other wood items or furniture.

Follow these guidelines below and removing the odor and eliminating mold spores should become easy.

Materials Needed

  • Clean cloth
  • Vinegar
  • Anti-fungal soap
  • Wood Soap or oil wood soap
  • Anti-fungal detergent
  • Sandpaper
  • Bleach or vodka

Step-By-Step Instructions

Step #1

First of all, it is important that you collect all your materials first. Gathering materials prior to starting the process of getting rid of the musty smell out of wood is essential since this helps you save a lot of time.

It is also essential that you keep everything clean. You have to make sure that the cloth that you are going to use is clean.

Image Credit: servicemasterrestore.com

Step #2

After gathering all the materials, the next thing that you need to do is to wipe and clean the wood that has “musty” odors. Again, we are not only eliminating the unpleasant odor but we are also getting rid of all the bacteria and germs.

Killing the bacteria is important in order for us to successfully get rid of the musty smell. You will get a sponge or a soft cloth and then damped with vinegar. If you search on the Internet, you will also find products such as oil wood soaps that are effective in getting rid of fungi and bacteria.

There are also numerous anti-fungal detergents that you can find online today. Make sure that you always check the quality of the cleaning product before you buy and use it.

Image Credit: pinterest.com

Step #3

After wiping and cleaning the area, you will then have to let it dry. Make sure that the wood item or furniture is in a well-ventilated area.

Image Credit: rominafurniture.com

Step #4

In order to get rid of odors inside the wood item or furniture drawer, it is necessary that you fill a plastic or glass container with a vinegar. Leave the vinegar inside the drawer and let it absorb all the odors.

Of course, you can also use other stuff for getting rid of odors such as charcoal, baking soda, coffee grounds, and any other absorbing substances.

Image Credit: makelyhome.com

Step #5

One of the best ways of getting rid of the musty smell out of wood is by exposing the wood in natural sunlight. Natural sunlight and dehumidifying is also an effective way of getting rid of moisture and odor out from your wood item or furniture.

After wiping or cleaning the wood item, it is essential that you let the wood dehumidify. You can always use natural sunlight.

Image Credit: makelyhome.com

Step #6

If the odor is still present even after dehumidification, then the next thing that you need to do is to strip and sand the area of the wood that smells bad.

You have to be very careful though and make sure that you don’t apply too much pressure when sanding. You want to get rid of the odor and not the beauty of your wood idea.

Image Credit: hammerzone.com

Step #7

You can also find people who are using bleach or vodka in order to get rid of the musty smell out of wood. These odor fighting substances are known to be effective and when it comes to getting rid of bad odors.

When purchasing substances or solutions that get rid of musty odors, it is important that you double check first whether it is safe for you and your family. It should also not damage the quality of your wood.

Image Credit: articles.extension.org

Conclusion

Learning how to get the musty smell out of wood should be a walk in the park if you follow these instructions. It is a guarantee that these bad odors will be eliminated if you follow these simple steps. Research is the key to eliminating musty smell out of wood.

How to Find Wood Studs

Once you will plan to hang pieces on the wall, add shelves or even attach a flat screen television, you need to make sure that you will be hanging it securely in place.

And in order to do it that then you need to locate the wood studs underneath it. You don’t want to end up with so many holes on your wall.

That is why it is crucial for you to be able to find the wood studs beneath those walls. If you want to know how to do it then you must read on this article and find out.

What you need to have:

  • Flashlight
  • Measuring tape
  • Hammer
  • Nail
  • Wired hanger

The process

Step #1

The first thing that you need to do is to shine a flashlight at a steep angle against the wall. You need to look at bumps or dimples in the surface. The irregularities are caused by nails securing the surface of the wall to the wood studs. If you can find these bumps then most probably, there will be studs underneath it.

Image credit: Alexnld.com

Step #2

The next thing that you need to do is to examine the baseboard for nails or outlets. The baseboard is the one that will be nailed to the studs as well. Up on the wall, the electrical switches are also generally mounted on the sides of the studs.

Image credit: DIY House Tips

Step #3

You now need to measure 16 inches from the first stud that you find to estimate the next one. Look for the same signs of any stud in that area. You can also rap on the wall and listen for a solid sound instead of a hollow one. If you can’t find any signs of studs within the 16 inches marks, measure 24 inches from the first stud and look again in there.

Image credit: Home Repair Tutor

Step #4

Once you think that you found a stud, drive a nail into the wall. If the nail will not hit any wood under the plaster then most probably, you didn’t hit any stud. You can use a wire hanger and insert it into the hole.

Twist the anger and maneuver it inside the hole. If you are looking in the right place then you will just slightly be off. The hanger should probably hit the stud as it will help you feel its location.

Image credit: wikiHow

Conclusion

Finding a wood stud underneath a wall is not really that hard. You need to do it correctly though in order to prevent any possible damages that might happen to your wall. All you need to do is to master all the steps that have been mentioned and most probably, you will find the wood studs that you are looking for.

How to Fix Warped Wood Floor

If you have experienced a warped floor then that could be devastating. Many people tend to stress out when they notice this one and this can mean ripping the whole floor out. This can also mean a huge spending on the part of the owner.

You need to know though that there are still ways on how you are able to address this one. You need to remember that this kind of issue is not as terrible as you think it is.

How moisture can damage wood floors

There are two main reasons why a wood floor will warp. And that could be either excise moisture or humidity. These things can be caused by a sudden change in temperature. This will also happen once there will be a changed in the season.

Most of the time, wood floor warping is caused by water just like any household issue that you may have. Warping and cupping are the two main types of wood floor damage that you can have. They can have varying degrees of deterioration.

What is Cupping?

Another term that you can have for cupping is washboarding. This is considered to be a mild form of floor damage. You can determine if it is cupping once you will have the edge of a wooden plank curl up and the middle part sinks.

Cupping is caused mainly by moisture imbalance. This can happen especially if there is moisture on the bottom of the wooden plank compared to the top portion. Your floor will be at risk for cupping once you will have a dry environment in the winter.

Once you will be spilling something or have a residual condensation then you will most likely experience cupping. You need to remember though that no matter how cupping may look bad but they can always be reversed.

By seeing to it that you are able to provide the usual humidity of the room then its damage can be corrected. This will help in balancing the moisture above and below the flooring.

What is warping?

Compared to the damage caused by cupping, warping can cause more. Warping can be seen in various forms of plank disfigurement. You need to remember that when you have warping then you should consider it as a serious issue.

Warping is commonly caused by standing water or heavy moisture below the floor. This can be accused by an unknown leak or a hidden water source.

There can even be a moisture imbalance even if there is a lake nearby or underneath the house.

What you need to have:

  • A mop or a sponge
  • Electric fan
  • Dehumidifier
  • Extra wooden planks

Steps to address floor warping

Step #1

The very first thing that you need to do once you will want to address warping is to find the water source. You need to know if there is a leak somewhere. You also should know if there is a spill that never got cleaned. Consider excessive mopping since it can sip into the subflooring.

Image credit: ACCROALAMODE

Step #2

Determining if there is flooding in the basement or a standing water nearby is also crucial. All of these factors can be the reason why floor warping exist.

Image credit: yourpcgotproblem.club

Step #3

You need to see to it that you will be able to correct the imbalance in humidity once you want to address cupping and minor warping.

Image credit: Antique Restorations

Step #4

Run the fan in the windows to blow warm air into the room especially during the summer. Air-conditioning can cause air to become dry and that is why turning it off can greatly help.

Image credit: YouTube

Step #5

Place a dehumidifier in the area to where damage is noticed or in the basement. This will help remove the moisture in the air and help in drying the damaged planks out.

Image credit: The Slow Woodworker

Conclusion

Once you will have a warped floor then it can certainly be aggravating. You need to remember though that having one is not always the end of the world to your wallet for that matter. You will be able to address it using some creative problem-solving skills. You also need to play around with humidity to correct the problem. If you are not able to handle things in your own then calling a professional to get the job done is always a good option.

How to Get Vinyl to Stick to Wood

Getting vinyl to stick to wood could be a challenge because wood is actually not the best choice for this material. Unsealed wood, plywood, and painted plywood are not good substrates for vinyl.

Vinyl is an adhesive-backed film that is expected to last for years indoors or even outdoors in all kinds of weather. Special techniques can be used to get vinyl to stick to wood, even course, and untreated wood.

Sticking vinyl to wood basics

To make vinyl stick to wood is done by using the right adhesive, the ideal wood treatment and by using the correct substrate material. Here are some pointers to follow.

Things you will need

  • Vinyl piece
  • Sandpaper
  • Solvent adhesive
  • Clean cloth

Instructions

Step #1 – Choosing the ideal substrate

To make vinyl stick to the substrate longer, you need to choose the ideal substrate material. Take note that this is the most crucial part of sticking vinyl on wood so take your time. The adhesive must have a firm bond with the substrate, therefore, you need a very smooth substrate.

Rough surfaces like unfinished wood will not provide a sufficient bond with adhesives used on vinyl. The vinyl may stick initially but most likely it is going to come off.

Step #2 – Heavier substrates for larger vinyl pieces

If you are placing large vinyl graphics on wood, choose heavier substrates. The most compatible options will be aluminum composite materials which are products made from a sheet of aluminum laminated to a thick and strong core made of a corrugated composite or plastic product.

If you really must use unsealed wood for your vinyl graphic, souvenir or any small wooden trinket then you must sand it first to get a smooth surface.

Step #3 – How about painted substrates

There are painted substrates available. But watch out for porous paints that won’t create a good seal with vinyl adhesive and also with the uncured paint. You must use paints that were developed for sign making, like 1 Shot brand. If this is not available, you can use enamel paint.

Step #4 – Make sure paint over the substrate is completely cured

If you are going to stick vinyl on a painted surface the paint should be completely cured. Fresh paint gives off dangerous VOCs which can react chemically with the adhesive and degrade it eventually.

When this happens, there will only be an adhesive failure even hours after you initially apply the vinyl. VOCs can also cause bubbles to appear under the vinyl and eventually this will cause failure.

Step #5 – Acrylic or solvent-based adhesives

Acrylic and solvent-based adhesives are not really the same. Learning the difference between the two will help you find the best choice for your project. Solvent-based adhesives are more effective on porous materials or surfaces like wood and stainless steel. This is, therefore, a good kind of adhesive to use if you want success in sticking vinyl on wood.

Special tips for applying vinyl to wood

Here are more tips on how to apply vinyl on wood.

Tip #1

If the wood is rough or porous you must sand it so that the surface will feel smoother to the touch. Use a moderately-fine grit of sandpaper to sand off the surface. If you have a router, sand the wood using this tool.

Make sure there’s no sawdust or residue on the wood before applying the vinyl. You must wipe all the nearby surfaces with a wet rag to capture all the dust that has accumulated.

Source: https://www.diynetwork.com/how-to/skills-and-know-how/painting/sanding-and-preparing-wood-before-staining

Tip #2

If the wood has been painted or sealed, allow a few weeks for the paint or sealant to completely dry before applying vinyl.

Source: https://www.pinterest.com/pin/22588435610637275/?lp=true

Tip #3

If you can choose the right paint, use 1 Shot or enamel paint. You must use only a vinyl with a solvent adhesive.

Source: https://www.misterart.com/painting/enamels/1-shot-lettering-enamel.html

Tip #4

In case the vinyl letters are coming up with the transfer tape when you apply it on the surface, give it some time to stick. You can moisten the tape to remove the letters and let it transfer to the wooden surface.

Source: http://www.freshstylemag.com/spooky-signage-chalk-paint-diy/

Conclusion

Vinyl is a good alternative to a natural wood finish and will last for a long time too for as long as it is applied to a substrate in the most efficient manner. Considering the substrate and the adhesive to be used will ensure that vinyl sticks to wood.

How to Pickle Wood

Pickling wood is not about stuffing pieces in a jar and preserving it. It is all about aging wood, mostly light-colored wood, so that these look and feels like antique, timeless furniture.

It is also a way to ward off pest especially insects that like to eat and burrow deep into the wood grains.

Pickling involves a steady process of applying chemicals into the wood to change its appearance.

Since wood is a living, breathing material, it changes dramatically and this is usually done on species like ash, oak or pine.

Pickling wood basics

Pickling is also known as bleaching or whitewashing. As these terms imply, wood is subjected to various techniques to make these look lighter. This appearance actually came from the 16th-century practice of infusing wood with lime in Europe.

This was done to prevent insects from infesting the wood. There are many ways to pickle wood. Here are some ways to effectively pickle wood.

Things you will need

  • Commercial pickling formula or leftover primer
  • Sandpaper
  • Medium-sized brush
  • 4-inch brush
  • Rag or reusable microfiber cloth
  • Latex white primer sealer
  • Water
  • CoatStir (optional)

Commercial pickling formulas

There are commercial pickling formulas that you can use to pickle wood but if you have a leftover primer then you can use this as well. This process is very simple and you can do this even if you have never pickled wood before.

The whitewash will collect in the darker grain and this creates a sort of negative impression of wood for a weathered or driftwood appearance in wood.

Pickling formulas work with red oak and can even work perfectly with pine floors, beadboard wainscot as well as paneled shutters. If you don’t have any leftover primer or paints, check out a premixed pickling solution like MinwaxWhite Wash Pickling Stain which is available in most paint stores.

Step #1

Sand the wood furniture that you want to work with. Sanding removes a little elbow grease. You can also use a medium-grit sanding sponge to scuff up all the surfaces to open pores of the wood. Scuff the wood with the grain.

Source: https://www.bunnings.com.au/diy-advice/home-improvement/tools-and-skills/how-to-restore-wooden-furniture

Step #2

Take a medium-sized brush and apply the solution.

Source: https://homefixated.com/pickling-wood-ten-tips/

Step #3

Wipe the paint off with a rag.

Source: https://homefixated.com/pickling-wood-ten-tips/

Step #4

When you are done painting your wooden furniture, vacuum any sawdust and wipe the surface
 with a reusable microfiber cloth.

Source: https://www.youtube.com/watch?v=ZLMFo1YIJwA

Using brush on pickling

This is another way to pickle wood using latex primer sealer plus water. Water will help the primer to seep into the many crevices of wood. The trick is to sand the wood lightly so that the solution will be able to move into the wood in a more efficient manner.

Just like the previous technique, sand the piece you are working on lightly. This allows the solution to take on evenly on wood. Mix a part of white latex primer-sealer with 3 parts water.

Make sure that the two mix completely before applying on wood. Use a 4-inch brush, paint on a patch of the pickling solution.

Creating a pickled finish on wood with rubbing and wiping

There are some types of wood that will pickle slowly by not completely applying the pickled finish. This method is all about rubbing the finish and then wiping it off.

Apply the finish with a light rubbing motion and then wipe it off.

Using a clean, dry rag to work the pickling solution into the wood and this time rubbing against the grain.

Wipe with the grain to remove the excess of the finish and to expose the grain. Repeat the steps and work in patches until you cover the entire piece evenly.

Creating a pickled wood with CoatStir

CoatStir is a polyurethane clear finish and may be available in hardware stores and in woodworking shops. This is not so popular but those who have used it swear that it works well on any kind of wood.

It is easy to use CoatStir. Pour it into a lined paint cup and use a 2½-inch paintbrush to evenly coat the entire surface of the wood. Let the CoatStir dry for 24 hours.

When the finish is dry, sand lightly with a fine-grit sponge. Wipe down the surface thoroughly with a clean and dry rag. Apply a second coat of CoatStir and if you are working on wooden outdoor furniture, apply a third coat.

Conclusion

Pickling wood can be done using a variety of techniques but the most popular is using paint primer. Pickled wood furniture can resist insects and will protect wood from the elements especially when it is used outdoors.

How to Get Wood Stains Off Hands

Products designed to stain wood can be difficult to remove from skin. sometimes these stains are so strong that these may even cause a slight discoloration of the skin as well.

But despite being difficult to remove it is possible to do so. This guide will show you how wood stains are removed from hands.

Removing wood stains from hands

Wood stains on hands and skin can be unsightly but no doubt that this can be removed even without doing anything because skin naturally exfoliates. But this can take a long time to do so.

The following techniques will help you remove stains in the nick of time.

You may choose from the following natural cleaners:

  • Isopropyl alcohol
  • Hairspray
  • Hand sanitizer
  • Drinking alcohol (such as vodka)
  • Lemon juice
  • Vinegar (white or cider)
  • Hydrogen peroxide
  • Toothpaste
  • Cooking oil
  • A cloth
  • Salt
  • Soap
  • Water

Steps to Remove the Stain:

Step #1

Select a cleaner from the list we have above.

Apply the cleaner on the stain. Use a damp cloth to apply it on the stain.

Source: http://www.howtocleanstuff.net/how-to-remove-bleach-smell-from-your-hands/

Step #2

Rub the stain well using an old but clean cloth that you don’t mind throwing away.

The stain will transfer to the cloth so rotate it to a clean section of the cloth to avoid transferring the stain to a clean area.

Source: https://www.dailymail.co.uk/femail/article-3689893/How-remove-makeup-stains-clothes-just-ONE-MINUTE.html

Step #3

You can use salt for improved scrubbing power.

After the stain has been removed, use soap and water to wash the previously-stained area. Repeat the process as many times as you need to be able to remove the stain completely.

Source: http://www.deadseaspacare.com/aromatherapy-scrub/salt-scrub.html

Step #4

You may also use other products like makeup remover wipes or acetone nail polish remover.

Source: https://www.readersdigest.ca/home-garden/tips/5-things-do-nail-polish-remover/

Step #5

If you really must remove the stain for an emergency use 1/2 teaspoon of chlorine bleach in a cup of water, then use bleach water to clean the area.

Never leave the bleach solution on your hands for a very long time because these may result in chemical burns. Completely wash the area afterward with soap to remove any bleach residue.

Source: https://www.healthline.com/health/bleach-on-skin

Whatever you do, never mix chlorine bleach with an acid or ammonia found in dish liquid because doing so can lead to the creation of dangerous gases which can cause respiratory conditions.

If you tried cleaning an area with an acid and would like to use bleach, thoroughly wash the area first and flush with water since acid residue is may also create a dangerous chemical reaction.

Solvent safety reminder

Solvents, such as paint thinner and mineral spirits, are the most effective for removing the stain from the skin but may come with some disadvantages. Petroleum-based solvents are highly flammable and will irritate your skin when used.

Some solvents are safer like water, which is also a solvent. Rubbing alcohol and acetone are also two of the safer solvents that will also be able to remove the stain.

Use a cotton ball, lightly saturate this with the solvent and rub the affected skin. once the stain has removed, wash the area with soap and water.

Using natural oils for stain removal

Natural oils can remove the stain from the skin. The most common ones are olive oil, vegetable oil, mineral oil or just about any kind of food-grade oil. Simply use a small amount of food-grade oil in a small tray.

Place your hands in the tray for a few minutes and scrub skin with oil until the stain is removed. Finish by washing your hands with dish soap to completely remove the oil.

Using simple home remedies

Make-up remover is another remedy that can remove stains on your fingers and hands. Eye make-up remover contains alcohol, mineral oil, and glycerin, plus a range of other ingredients that can also help remove stubborn stains from skin.

You may even find some make-up remover kits with their own pads that you use to scrub on your face or hands.

Conclusion

Wood stains on hands can be removed easily with simple household items. You can wash it with alcohol, paint thinner or mineral oil without causing any irritation and without releasing harmful ingredients to the atmosphere. But you must be very careful when using solvents to remove wood stains on hands as well.

How to Make a Tabletop From Planks

Making a tabletop from planks is a creative and useful wood project. Reclaimed wood planks can be made into a tabletop suitable for multifunctional uses such as a patio table or woodwork space area.

In this article, you will learn how to make a tabletop from planks.

What You’ll Need to Follow This Tutorial

The tools and materials you’ll need include table saw, hand saw, circular saw (7 ¼ inches), dust mask, biscuits (#2), and reclaimed wood gutter (24 feet pieces).

Step-by-step Guide to Making a Tabletop From Planks

1) Top Planks Preparation

It is important that the wood is dry. Keep in mind that the material from floor joists or job site may have a high level of moisture because it might have existed in a crawlspace. A dry material from a conditioned space is perfect and you can dry it in a kiln or store inside during winter.

You can stack wood planks in a hot and dry place with 1-inch spacers between layers. Let dry for a minimum of 2 weeks.

Image Source: https://i.pinimg.com/originals/3e/b7/35/3eb735e274dc2fa1d852015079f6ef27.jpg

The boards are rough-cut to the desired length and plus 2 inches, then a final cut is done after joining the planks. If ever the planks are twisted or cupped, you need to plane them at your local millwork shop or use a tabletop planer and do it yourself.

Check the planks and remove the nails as well as excess dirt, and strip just a small amount of wood on each side.

2) Find a Reclaimed Wood

Floor joists and rafters from demolition jobs and renovations work. Make sure to pull the nails carefully as well as staples. It is important to ask a clear permission if you are planning to source materials from a job site or renovation area and wear appropriate safety gear.

Asbestos and lead paint may be mixed with the clean wood. Pull the nails out before you load the wood planks in your car or truck for proper stacking.

Image Source: http://1.bp.blogspot.com/-Uwekf7_8l3I/TeWNvcQy2uI/AAAAAAAABPA/ycj1FX0Rm6g/s1600/Plank+Top+table+1.jpg

3) Building the structure of the table

Clean the wooden gutters of any dirt or loose debris. Also cut them to a manageable length and miter down so a 40 x 94 inches rectangle is formed. Coat the corners using wood glue. Fasten them together with finish nails (15-gauge).

If the miters are tight or 45-degree cuts, the box should be square. Before you fasten completely double check the diagonal measurements and they should be close to equal as much as possible.

Image Source: https://i.ytimg.com/vi/e0qy0QeWiFs/maxresdefault.jpg

Once completed, set the box on a flat and clean surface. Cut the antique column to form legs in half at the profile’s center line and trim them to 34 inches length.

Cut the walnut flooring scraps to attach wood pieces to the legs using a wood glue and finish nails (18-gauge). Measure the thickness of the top.

4) Lay the best 4 planks out on a clean and flat surface

Arrange them in their final position. Make a mark along the seam of two boards at every 8-inch point using a pencil or marker. After the marks are made, the joiner is used to cut the biscuit slots in every location. Stand the boards on nd, coating the jointed side edges with wood glue.

Using glue, coat the biscuits and insert in one side of each board and in the empty joint of the succeeding board.

Image Source: http://www.ana-white.com/sites/default/files/3154845257_1399432280.jpg

5) Assemble the planks until the top is complete

Carefully lay the top down and attaching the pipe clamps are the next steps at roughly 1-inch intervals. Each pipe clamp is slowly tightened in a consistent fashion for the gaps to disappear. Sand any glue marks or rough spots.

Now, you can paint, stain, or wax the gutter, table, and legs. Apply wax over several days to for the wood grain to be fully saturated.

Image Source: http://artofmind.info/wp-content/uploads/2018/03/rustic-wood-table-top-rustic-wood-clear-finish-reclaimed-pine-table-top-how-to-make-a-rustic-wood-table-top.jpg

Conclusion

You have just gained an understanding of the step-by-step process of making a tabletop from planks. It is important to use a dry wood for the best results and be wary of any safety and environmental risks, most especially when handling reclaimed wood planks from job sites, demolition jobs, or renovation sites.

Do you find this article very useful and helpful? Leave a comment and share this post now!

How to Preserve Wood

Just like any living thing, wood may be preserved and admired for years and years to come. Preservation techniques vary but all have one goal: to maintain the natural beauty of wood.

As there are many types of wood and species of wood, one can only imagine the variety of preservation techniques available. Some use a special preservation solution while some rely on nature’s powerful preservation strategies.

This guide will help you learn basic techniques to preserve common wood species.

Wood preservation techniques

When you preserve wood, it becomes timeless and very valuable. Wood furniture like antiques are examples of what strict preservation can do. You can preserve just about any type of wood. Just follow these steps.

Things you will need

  • Wood or wooden furniture you want to preserve
  • Clean and dry rags
  • Putty (optional)
  • Any commercial oil or tung oil

Instructions

Use natural oils to preserve wood. Oil will soak into the wood’s pores and will keep wood strong and resilient to the elements. Oil will also slow the absorption of water which is responsible for rot.

Use a couple of coats of oil and this will be enough to preserve and protect wood for many years. One of the most common oils used is teak. There are other woods that do not need to be preserved like teak.

This is a uniquely long-lived wood that does not require regular oiling. But once it has been oiled it may require periodic reapplication.

Tung oil is one of the most commonly used oil for preserving wood. It is quite expensive and may take time to dry but no doubt it gives amazing overall protection.

Use a finish that contains tung oil because this provides better water protection than applying 100% tung oil.

Do not use varnishes that will only create a top layer of oil instead of soaking the oil in the wood. Be sure to use only genuine tung oil products

Step #1

Remove dust and dirt from wood. Use a clean and dry towel or rags to wipe off the wood.

Inspect wood for any imperfections or flaws. Repair them using putty or filler.

Source: https://www.furniture-refinishing-guide.com/articles/furniture-cleaning/

Step #2

Select oil or any commercial product used for wood preservation ideal for home or hobby use. Follow manufacturer’s instructions on how to use the product. If you are preserving cutting boards and other wooden kitchen equipment, use only food safe oils like coconut, walnut or almond oils.

But avoid walnut and almond oil if someone in your family has nut allergies. To use these natural oils, add ½ teaspoon melted beeswax for each cup of oil for additional protection.

Use a clean, dry rag for rubbing the oil and newspaper to catch spills. Most of these oils are flammable therefore you must use a metal container to store the oil as well as other materials you will be using.

Always have access to water or a fire extinguisher if ever these materials spontaneously ignite. However, the flammability is greatly reduced once the oil dries.

Source: http://themoderndiylife.blogspot.com/2012/12/diy-beeswax-wood-polish-and-sealant.html

Step #3

Rub the oil in slowly. Use a clean cloth to rub the oil into the wood. You must cover the entire surface for improved protection. For the best and the most consistent results, dab the oil on the surface of the wood a bit at a time.

Applying more oil at once is okay especially if you want to save time but keep in mind that the more you rub at one, the more changes in shine and color that will likely occur.

Source: https://www.decoora.com/diferentes-formas-de-usar-la-cera-para-muebles/

Step #4

Remove all excess oil at once using a rag. The oil that soaked into the wood will provide the protection and any excess oil will only make the surface look gummy and discolored.

If the oil has dried on to the surface, wet a cloth with a little more oil to wipe it up again.

Source: https://www.curriesfurniture.com/care-and-cleaning/

Step #5

Apply more coats and if you wish you can do a bit of sanding in between. At least two or three coats of oil are ideal for long-term preservation.

When you are done wiping oil all over your wooden piece, air-dry the rags in a single layer away from heat.

Source: https://knowledge.axminster.co.uk/applying-wax-quick-guide/

Conclusion

Preserving wood is done by wiping layers of oil. Safe natural oil is recommended to provide a good layer of protection that can make the wood last and protect it from mold and pests as well.

How to Paint Faux Wood

Faux wood looks like real wood but is actually made from either composite wood material or PVC/vinyl material. The most common use of faux wood is to make window blinds, cabinet surfaces, and toys.

If you are eyeing a project that uses faux wood, it is essential to know how to paint this kind of material. Even faux wood needs protection from the elements! This guide will show you how.

Painting faux wood steps

The problem with faux wood is that it’s not really 100% wood so you need help just getting paint stick to the material. Some experts advise sanding the surface of the faux wood while some just use a generous coat of primer to prep the wood before applying the top coat.

Here is a combination of the two techniques.

Things you will need

  • Faux wood
  • Drop cloth, newspaper or tablecloth
  • Painter’s tape
  • Paint or spray paint
  • 220 grit sandpaper
  • Paintbrushes
  • Screwdrivers

Prepping your workspace

Cover the surface and wear some old clothing or a work apron as well. Be sure to open windows to ensure good ventilation. Remove all hardware like knobs, hinges, and metal plates.

Cover anything that you do not want to be painted with painter’s tape. Sand the surface with a sanding block to smooth away any imperfections, and then move on to sandpaper. If you are painting on a smoother surface, start with 120-grit sandpaper and move to 220-grit.

Wipe the surface with a tack cloth, then clean it with warm, soapy water, rinse, then let it dry completely. If the item you are painting is made from plastic, wipe it down with rubbing alcohol after washing with soap and water.

Choose the right materials

Choose light, dark and medium shades of brown acrylic craft paint. Begin with a medium shade of brown as a base then 1 darker shade and 2 to 4 lighter shades of brown for the shadows and highlights. For a more pronounced woodgrain, choose 1 to 2 shades that are darker and lighter than the base coat.

Paint your material

Step #1

Apply a coat of acrylic primer and let this dry. Use an acrylic primer that is suitable for the surface you are working on: wood, metal, plastic, etc. Use a wide, flat paintbrush. For a spray-on primer, then apply it in a well-ventilated area using a sweeping motion. Most primers will take about 20 minutes to dry.

Source: https://www.diynetwork.com/how-to/make-and-decorate/decorating/how-to-paint-a-faux-wood-grain

Step #2

Paint the entire piece with medium brown shade and let this dry. Apply an even coat of paint using a wide, flat paintbrush. Let this dry as well. Brush on the darkest shade of acrylic craft paint using a dry paintbrush. Be sure that you go over the entire surface so it’s evenly covered in streaky, dark-brown lines.

Source: https://www.diynetwork.com/how-to/make-and-decorate/decorating/how-to-paint-a-faux-wood-grain

Step #3

Let dry before layering on the other colors. Begin with a darker shade first, then the lighter shades. Make sure that every color is dry before applying another.

Source: https://www.diynetwork.com/how-to/make-and-decorate/decorating/how-to-paint-a-faux-wood-grain

Finishing the project

Let the paint dry and cure completely by placing it in a dry place in your home like your garage or tool shed. Acrylic paint usually takes about 20 minutes to dry, while latex paint can take an hour or more.

Some latex paints have a curing time that can take up to 48 to 72 hours, to 7 to 20 days! Be sure to look for your paint’s curing time from the label. Seal your work with a varnish. This will protect the surface but will also accentuate the woodgrain of the faux wood.

If you used latex paint, apply a thin coat of polyurethane varnish using a soft-bristled brush. For acrylic paint, use an acrylic sealer with a wide paintbrush. You can use more than 1 coat of sealer but make sure that the first coat is dry before applying the next one.

Let the varnish dry and cure completely. Be sure to read the label on your bottle or can of varnish and check for the drying and the curing times. If you don’t let the varnish cure before using the object, it may look tacky.

Conclusion

Faux wood is not genuine wood and therefore may take differently to paint and varnish. You must apply primer and a top coat of paint that will work with the type of material you are working on. You may opt to seal the surface if you wish. Take note of curing and drying times of varnish.

How To Join Two Pieces of Wood at a 45 Degree Angle

Constructing wood projects is a great way of turning your innate talent into beautiful objects. To achieve the perfect look of every wood project, you need to put the wood pieces together by getting the most out of wood joinery techniques.

In this article, we will learn how to join two pieces of wood at a 45-degree angle.

What Do You Need to Keep in Mind?

Wood is naturally made of fibers that run side by side. While gluing up would allow the sides of the wood fibers next to each other usually results in a strong glue joint, gluing the ends of the wood fibers will be a weakly joint.

Joining two pieces of wood at a 45-degree angle is made possible using one of the 6 joinery techniques. These are the edge joint, miter joint, butt joint, a dovetail joint, mortise and tenon joint, and dado joint.

What You Will Need to Follow This Tutorial

The important things you need to prepare to join two pieces of wood at 45-degree angles include a compound miter saw, glue, screws, clamp, measuring tool, and the wood or board you need to join. Preparing these tools and materials before you start your project will definitely save your time and effort.

What is an Edge Joint?

Having large boards to create your project is amazing. Unfortunately, you have to create a panel that’s 8 inches wide, and the widest board is only 6 inches in width.

Fortunately, gluing up the boards side by side is a relatively easy way to create wider boards. The edge joint is very durable.

The wood surrounding the glue joint breaks before the glue does if ever you try to break the board.

You may use dowels or biscuits to help align the boards. However, they’re really required for strength.

Gluing wood fibers from end to end is weaker, so this method of lengthening a board won’t work.



Image Source: https://image.slidesharecdn.com/23joints-140114083202-phpapp02/95/23-joints-6-638.jpg?cb=1412323543

What Is a Miter Joint?

Miter Joint provides a better glue surface because the 45-degree angle has a semi-long grain and long grain glue surface.

But this technique still not ideal, and you may need splines or a biscuit for extra strength.

Miter joints are used in situations where the strength is not that critical, as the face frame.

Miter joints are used in situations where the strength is not that critical, as the face frame.

What is a Butt Joint?

This is an easy and quick way of joining two boards at right angles. But the end grain is mating with one board’s long grain from the other. The glue won’t hold the boards together so joints are best reinforced with nails or screws.



Image Source: https://image.slidesharecdn.com/

How to Join Two Wood Pieces Using Miter Joint

The tools you need to miter the corners of your wood project depend on what you are cutting and the manner it is cut. The standard cuts are done with the use of a hand saw and a miter box. With more complex cuts, you’ll need a table or circular saw.

Image Source: https://i.ytimg.com/vi/XUV00cQgync/maxresdefault.jpg

Determine the miter angle by measuring the complete angle change, and dividing that by the number of pieces making the turn. The 45-degree angle is the most common miter angle.

Image Source: http://tic.wpengine.netdna-cdn.com/wp-content/uploads/2011/05/RafterAngles.jpg

The next step is measuring the starting points. You will have one side longer than the other because the cuts are angled. It is important to keep track of the side and measurement correctly.

For instance, the measurement of the wall on an inside corner piece needs to be equal to the longer and back area of the wood. The inside needs to be equal to the wall for an outside corner with the shorter distance.

Image Source: https://www.wikihow.com/images/thumb/b/be/Miter-Corners-Step-2-Version-3.jpg/aid25861-v4-728px-Miter-Corners-Step-2-Version-3.jpg

Measure the angled gap using scraps at first. Calculate how much additional material you will need at the end since the piece needs to be longer as compared to one side that actually appears, like inside corners.

For a standard 45-degree mitered corner, you will need a gap at the end which is equal to the wood piece depth.

Image Source: http://tic.wpengine.netdna-cdn.com/wp-content/uploads/2013/06/fig-15-1.jpg

Set your miter saw to your desired angle, line up the wood, clamp the wood, and start sawing. Raise your saw and wait for the blade to stop moving. When joining the two pieces of wood at a 45-degree angle, you may use clamps, dowels, glue, and nails, or notch joint.

Image Source: https://www.canadianwoodworking.com/sites/default/files/images/articles/gluingtechniques_lead.jpg

Conclusion

The basic way to join two pieces of wood at a 45-degree angle is using glue and nails. This method works best when the wood pieces will be nailed. You can also use dowels if the wood is thick enough, adding support, and making the joints stronger. Do you find this post helpful? If yes, like and share it and leave a comment below.

How to Get Paint off Wood Floor

Want to know how to get paint off wood floor? Then this article can be of great use to you. Getting rid of paint off the wood floor can be a tedious and daunting task if you have no knowledge on how to do it properly.

There are some steps that you need to follow to ensure that will be able to totally get rid of paint off of the wood floor. When doing these kinds of task, it is necessary that you conduct an online research first.

Listening to the advice of other people who have successfully get rid of paint off their wood floors is also a wise thing to do.

Follow these guidelines and you will surely be able to accomplish your goal.

Materials Needed

  • Soap
  • Water
  • Denatured alcohol
  • Cleansing pads
  • Paint thinner
  • Paint removal solutions or products
  • Paper towel or dry rag
  • Dull Knife

Step-By-Step Instructions

Step #1

Before you start getting rid of paint off your wood floor, it is essential that you take the time to gather all your materials first. You need to make sure that you have everything you need before you start getting rid of paint off of your wood items.

By preparing your materials, you will be able to save a lot of time since. Being prepared is to be efficient.

Image Credit: sellinggoods.site

Step #2

After gathering all the materials that you need, you need to determine whether the paint is oil based or water based. You should be able to find this information on the paint container.

Reading the label is essential for you to know what kind of method or actions you need to take when removing paints.

Image Credit: countrydesignhome.com

Step #3

Take note that it is best that you wipe up the paint stain right after it spills on your wood items or floors. You don’t want to let the paint stay on your wood floor for many hours or days. This is also the best time for you to get soap and water.

If the paint is water based, then it can easily be lifted with soap and water. Make sure that you carefully scrub the floor and make sure that you don’t damage the surface of the wood.

Image Credit: thekitchn.com

Step #4

You will then get the damp paper towel and try to rub the paint stain on the wood. It is necessary that you moisten the based paint in order for you to easily remove it.

After rubbing the paint, wait for a few minutes and then try using a clean rag to rub it.

Image Credit: lovebackyard.com

Step #5

You will then get a knife that has a dull edge (you can also use a credit card). What you will do is you need to scrape the dried paint off of your wood floor.

You don’t want to use a sharp knife or cards since this can damage the beauty and quality of your wood floor.

Image Credit: realtor.com

Step #6

After using the dull knife to get rid of the paint, the next thing that you need to do is to get a denatured alcohol. You can buy them almost everywhere. Denatured alcohol is best used when you are trying to remove paint that is oil based.

This kind of alcohol can effectively get rid of all the paints without causing damage. When applying denatured alcohol, make sure that you rub the wood surface carefully. You don’t want to rush things.

Image Credit: thriftyfun.com

Step #7

You will then get a dry towel or rag to wipe out all of the remaining paint and denatured alcohol.

Image Credit: hunker.com

Step #8

There are also households out there who are using paint removal solutions or paint thinner. When choosing this method, it is vital that you wear a protective mask or that you wear gloves. These chemicals or solutions may contain harmful chemicals.

Image Credit: pinterest.com

Conclusion

Getting paint off the wood floor should be a lot easier if you follow these guidelines. It is a guarantee that you will be able to efficiently and successfully get rid of all the paint if you have these materials and follow the instructions.

And as you are trying to get rid of the paint off your wood floor, it is critical that you be careful.

You need to make sure that what you are getting rid off is only paint and not the beauty of your wood items or furniture.

How to Get Mold Off Wood

Looking for the best guide on how to get mold off wood? Then you came to the right place.

Mold spores are everywhere and they float through the air. It doesn’t matter whether your wood crafts are placed indoors or outdoors, molds can still appear.

Molds love to grow in a warm and moist environment. They can make your furniture look ugly and you’ll definitely feel disappointed. You need to find ways on how to make sure that your wood furniture won’t get speckled with mold spots.

Gather all your materials first and then check out this easy to follow instruction should help you solve the mold problems on your wood.

Materials Needed

  • Rubber gloves
  • Safety goggles
  • Air mask
  • High-quality HEPA-filtered vacuum
  • Scrub brush (preferably those that have soft bristles)
  • Bleach and dishwashing detergent
  • Strong distilled vinegar
  • Sandpaper
  • Sponge

Step-By-Step Instructions

Step #1

Get your protective gear such as rubber gloves, safety goggles, and air mask. It is critical that you keep yourself safe and protected. Your goal is to prevent mold spores from entering your lungs.

Also, you need to make sure that you protect yourself from strong chemical solutions such as bleach and other cleaning solution – wear protective outwear.

You also want to make sure that you protect your clothes against stains caused by chemical solutions.

Image Credit: https://www.wikihow.com/Remove-Mold-from-Wood-Furniture

Step #2

The next step is to get your HEPA filter vacuum. What you need to do is to vacuum the affected area of the wood. The reason why we are doing this to loose and remove any mold spores.

The advantage of using vacuum is that apart from removing mold spores, you are also removing accumulated dirt and debris. After vacuuming the molds, you need to make sure that you empty the vacuum canister and place it in a plastic bag.

Seal the plastic bag tightly and then make sure that you dispose of it properly.

Image Credit: https://www.wikihow.com/Remove-Mold-from-Wood-Furniture

Step #3

You will then need to soap and water the wood. If the wood that you are dealing with has paint, then it means that the ugly molds have not yet penetrated the wood surface.

If this is the case, then you can use a mild cleaning solution together with warm water. This is also the time where you are going to use the scrub brush.

If the molds are still there, then what you can do is to use vinegar in order to kill molds. Get your sprayer or mister and fill it with vinegar – spray generously to the affected area.

After spraying vinegar, you will then wipe the wood with a damp and clean towel. Always inspect whether or not there are still remaining molds.

Image Credit: https://www.wikihow.com/Remove-Mold-from-Wood-Furniture

Step #4

If the mold has penetrated on the wood surface, then you need to use stronger cleaning solution. You can mix 1 part detergent bar and 5 parts of bleach and 10 parts of warm water. Simply apply the solution to the area that is affected with molds. Then make sure that you use the scrub brush that has stiff bristles. You also need to make sure that you air-dry the wood.

Image Credit: https://www.wikihow.com/Remove-Mold-from-Wood-Furniture

Step #5

Sanding is also a great way of getting mold off the wood. After you did step 3 and 4 and the mold is still there, then it is time for you to use the sandpaper.

Make sure that you work the sandpaper around the molded area slowly and carefully. It is also advisable that you refinish the wood not only to make it more presentable again but to also prevent future mold outbreak.

Image Credit: https://www.wikihow.com/Remove-Mold-from-Wood-Furniture

After doing all of these, the next thing that you need to do is to learn mold prevention. You need to keep in mind controlling dampness is also preventing mold infestation. Make sure that you prevent dampness. This should preserve the quality and the condition of your wood.

Conclusion

Molds can damage your wood items or furniture. It is vital that you get rid of them properly and make sure that you prevent the future outbreak. The key to stopping molds from destroying your wood is prevention. It is better that you are aware of the humidity and the temperature of the environment where your food is placed. Preventing molds or getting them off your wood should not be that difficult if you follow these instructions.

How to Get Nail Polish off Wood

Learning how to get nail polish off wood should be very easy if you follow these guidelines. Spilled nail polish can ruin the beauty of your wood furniture.

It is essential that you know what you are doing when getting rid of nail polish. You want to make sure that you don’t do damage to the wood.

And before we proceed with the instruction, it is important that we gather all the materials that we need.

Materials Needed

  • Cotton
  • Tissues
  • Soft cloth
  • Rubbing or denatured alcohol
  • Nail polish remover
  • Detergent and warm water
  • Sponge

Step-By-Step Instructions

Step #1

After we collect all the materials that we need in order to get rid of nail polish off wood, the next thing that we need to do is to assess the wood item or furniture.

You need to make sure first the quality of your wood. Check whether or not the wood that you have is very porous. Different woods have different porous qualities.

Image Credit: i.pinimg.com

Step #2

If the nail polish on the wood is still wet, then it is necessary that you apply even pressure to the stain. You can use cotton, tissue, or soft cloth. It is essential that you apply gentle pressure during the removing process.

Some experts suggest that you use a rubbing or denatured alcohol, but you have to be very careful when using these kinds of solutions. Always try to go in the direction of the grain.

Again, it is essential that you only apply light pressure and that you do not rub the nail polish aggressively. Rubbing it harshly can damage the wood.

Image Credit: wikiHow

Step #3

After rubbing the alcohol on the wood, you need to lightly scrub it after a few minutes. You need to check whether or not the nail paint is coming right off. Wait for the alcohol to dry and then rub it again.

Always use a clean cloth when scrubbing nail polish off the wood. You can also use nail polish remover aside from using rubbing or denatured alcohol. It is vital that the nail polish remover that you are going to use is top quality.

Always check whether or not it is safe for your wood items. Avoid those nail polish removers that contain strong and harmful chemicals. Again, always check the solution or check the manufacturer.

There are some wood experts out there who suggest that you don’t use nail polish remover since it will likely do more harm than good since it leaves unwanted color.

Before you use nail polish remover, you have to check and test it to other wood first.

Image Credit: biohomecares.com

Step #4

It is also advisable that you use detergent and warm water when removing nail polish off the wood. What you need to do is mix the detergent with hot water and then put it inside a sprayer or mister.

The detergent solution should be able to get rid of the nail polish. You will then get a sponge and then try to rub the area while spraying the detergent mixture.

After rubbing the area, spray it again and then let it sit for about 20 to 30 seconds. Don’t rub it yet.

Image Credit: Reader’s Digest

Step #5

After allowing the detergent solution to sit, you will then clean the area with the sponge. Make sure that you are using a clean and soft sponge. Repeat the process if the nail polish is still there.

Image Credit: bles.com

Conclusion

You have to be very careful when rubbing your wood with certain solutions or chemicals. Your goal is not only to get rid of nail polish off the wood, but it should also be your goal to make sure that the quality and appearance of your wood item or furniture is preserved.

Asking recommendations or pieces of advice from individuals who have tried getting rid of nail polish of their wood item or furniture is also a wise thing to do.

How to Get Crayon off Wood

Want to know how to get crayon off wood? You came to the right place since this article is giving you easy to follow tips and tricks on how to get rid of crayon off your wood items or furniture.

The good news is, removing crayons is an easy and inexpensive task. It is our aim to provide you with useful guidelines that are not only effective but can also help you save a lot of time and money.

By the end of this article, you should be able to learn the proper way of getting rid of crayons off your wood furniture.

Gathering your materials before cleaning and wiping off crayons is essential. You need to stay organize since this can help you save a lot of time.

It is important that you collect all the things you need first to ensure that you will be able to finish your job efficiently.

Materials

  • Clean cloth or sponge
  • Scrub brush and paint brush
  • Feather duster, broom, and dustpan
  • Mini vacuum
  • Bucket
  • Starch and water

Step-By-Step Instructions

Step #1

The first thing that you need to do is to clean the wood item or furniture. You need to make sure that you clean the area that where the crayons were marked.

Get rid of all the dirt and dust from your wood item or furniture. Use a feather duster or a mini vacuum. Make sure that there are no dust or dirt on the affected area.

Image Source: https://www.pinterest.co.uk/pin/46654546114184628/

Step #2

After cleaning the area, the next thing that you need to do is to lightly dampen the sponge that you have. You can also use washcloth or paper towel. You will then gently blot up any dust or dirt on the affected area.

Dusting makes the crayon stain easier to remove. Once the area is already dusted, then we can proceed to the next step.

Image Source: https://www.hunker.com/12001322/how-to-get-crayon-off-of-a-wood-coffee-table

Step #3

You will then apply a stain-removal solution. This is the time when you are going to mix the starch and the water. Stir the solution inside the small bucket and then make sure that it becomes thick. The appearance of the mixture should be like a paste.

Image Source: https://busymommymedia.com/classic-sensory-play-corn-starch-and-water/

Step #4

After making the paste-like substance, the next thing that you need to do is to get a sponge and or the clean cloth. Apply the solution onto the wood that was stained by crayons. You can also use a paintbrush for you to apply the substance or solution. Make sure that you don’t put in too much pressure when wiping the crayons. It is also essential that the clean cloth is soft.

Image Source: https://www.wikihow.life/Get-Stains-out-of-Wood

By the time you finish rubbing the crayons with the solution, you will then brush it with the same solution and let it sit for at least 3 hours. The solution will harden and it is effective in lifting and removing crayon stains.

You will then remove the cleaning solution. After letting the solution sit for at least 3 hours, the next thing that you need to do is to clean it. Get a clean cloth or sponge and then gently scrub the areas where you place the solution. When rubbing, it is recommended that you follow a circular motion.

The next thing that you need to wipe the solution. After successfully removing all the crayon stains, the next thing that you need to do is to use your mini vacuum and get rid of the broken-up pieces of crayons and the solution.

If you the crayon stains on the wood have not been completely removed, then you will have to repeat the steps 4, 5, and 6.

Alternative Methods

You can find homeowners out there who are using non-gel toothpaste in order to get rid of crayon marks from wood. Use your finger and spread the toothpaste into a thin layer. Let the toothpaste sit for at least 10 minutes and then wipe it away with a soft or damp cloth.

Conclusion

Learning how to get crayon off wood should be a very easy and simple task. Just follow these guidelines and there is no doubt that you will be able to completely remove crayon marks or stains from your favorite wood item or furniture. Asking for advice from people who have successfully get rid of crayon marks before is also a brilliant idea.

How to Get Paint off Stained Wood

Wondering how to get paint off stained wood? Then this article is definitely for you. If you search on the Internet today, you will discover that there are so many ways in which you can get the paint off the stained wood.

However, it is important to note that not all of these methods are effective. There are important things that you need to consider first before you select a particular method in getting rid of paint off stained wood.

Fortunately, this article is written to provide you with accurate information and easy to follow guidelines on how you can successfully get rid of paint off stained wood.

Before you start getting the paint off the stained wood, it is essential that you collect all the materials that you need first.

Materials Needed

  • Clean towel
  • Sponge
  • Warm or hot water
  • Paint thinner’
  • Knife or credit card
  • Soap

Step-By-Step Instructions

Step #1

First things first, it is necessary that you are able to determine what kind of paint you are going to remove. There are different kinds of paint out there and each of them requires a different kind of removal method.

If the paint is water-based, then removing it with a clean towel and a warm water with soap should be enough.

However, if the paint is oil-based, then you are going to need more than just warm water, you need a paint thinner.

Always check what kind of paint you are going to remove, this should help you save a lot of time and money.

Image Source: https://www.addicted2decorating.com/how-to-strip-paint-stain-polyurethane-from-furniture-my-top-tips.html

Step #2

After figuring out what kind of paint you are going to remove, the next thing that you need to do is to get a clean towel and then and then wipe the paint from the wood surface.

Take note that it is easier for you to get rid of the paint if it is still wet. You don’t want to wait for the paint to get dried out since this can make things more difficult.

However, if the paint is already dried then it is essential that you wipe it with a clean towel that is soaked with hot water with soap – you have to be very careful when doing this.

Hot water should be able to loosen up the paint, making it easier for you to remove it. Also, it is recommended that you use a scrub or a sponge to get rid of dried paint.

Image Source: https://www.wikihow.com/Remove-Paint-from-Walls

Step #3

Now, if you are trying to remove a paint that is oil-based, then you need a paint thinner. Paint thinner can be bought almost anywhere and they are very affordable.

Just make sure that you check the quality of the paint thinner first before you buy and use it. Get a clean cloth and then apply a small amount of paint thinner to the cloth. You will then wipe it across the painted area in a circular motion.

It is vital that you be careful when applying paint thinner since this can also affect the surface of your wood. It is possible that you will be removing the finish from the surfaces of the wood that have not been exposed to the paint.

Thus, be very careful and make sure that you are only applying paint thinner to surfaces that have been stained with paint.

Image Source: https://www.wikihow.com/Remove-Paint-from-Walls

Step #4

In order for you to be able to remove large droplets of dried paint on the wood, you need to use a sharp utility knife. Again, you have to be very careful when scraping the paint. Make sure that you scrape the paint lightly.

You can also find other people who are using a credit card to get rid of paint.

Image Source: https://www.wikihow.com/Remove-Paint-from-Walls

Step #5

If the paint is too hard to scrape, then it is time for you to add a few drops of olive oil into the paint. Cover the paint with a clean cloth and let the olive oil soak in for half an hour. Then wipe the paint using the cloth soaked in olive oil.

Image Source: https://www.wikihow.com/Remove-Paint-from-Walls

Conclusion

Getting rid of paint off stained wood should not be that difficult if you do you follow these guidelines. It is necessary that you also seek advice from other people who were able to successfully get rid of paint off stained wood. The important thing is that you are able to successfully get rid of the paint without damaging the quality of your wood.

How to Inlay Metal Into Wood

Inlaying a piece of metal into wood is using two contrasting materials and no doubt that this will yield excellent results. You can find wood inlay designs that include metal in wood in various items like picture frames, jewelry boxes, musical instruments and so on.

You must learn inlaying techniques because this is an amazing way to decorate wood for any purpose. This guide will show you how.

Metal to wood inlay steps

Metal to wood inlays is easy to make once you have learned correct techniques and have the right tools and materials for the job. When it comes to metal inlaying, there are many types of metal that can be used.

Take note of the shape of the metal, the size and the characteristics that make it unique. Learning these important bits is essential for a successful inlaying process.

Things you will need

  • Wood base
  • Metal inlay
  • Sandpaper
  • Glue or epoxy

Instructions

Step #1

Select your base for the inlaying process and the metallic piece that you want to inlay to the wood. A dark and a light material is a good idea. Cut the metal inlay to a simple, easy to work with the shape.

Cut metal pieces using a router or a hand saw if this is a thin piece. Thicker pieces need to be cut with a blowtorch. This is an example of what an inlay looks like.

Source: https://www.popularwoodworking.com/projects/butterfly-inlay/

Step #2

Place the inlay metal piece temporarily on the base so you can trace an outline. You can use a double-sided tape or glue to temporarily hold the metal piece as you trace with a pencil. The metal may be cut any shape to fit the inlay.

Source: https://www.tapatalk.com/groups/paleoplanet69529/how-to-make-simple-inlays-t33591.html

Step #3

Now that you have transferred the shape of the inlay to the wood, cut the traced lines using a sharp knife. Use an X-Acto knife or other hobby knife because this can cut into the traced lines without missing a grain. Start the cutting process by lightly scoring the wood to get a groove.

Source: https://www.tapatalk.com/groups/paleoplanet69529/how-to-make-simple-inlays-t33591.html

Step #4

Run the knife further deep into the wood. Cut further down lets you move the knife over the surface without slipping on the surrounding areas of wood. Be sure to cut only into the wood enough to hold flush the metal inlay piece. As you cut the groove, fit the entire inlaid piece.

Source: https://www.tapatalk.com/groups/paleoplanet69529/how-to-make-simple-inlays-t33591.html

Remove the inlay and cut the wood underneath it. You will need to make a recessed part on the wood where the metal inlay piece will be placed. You may use simple hand tools like a router plane, chisel, or sharp knife can help.

On the other hand, a laminate trimmer or a router will be able to help you make precise recesses without wasting too much time.

Step #5

Use sandpaper to smooth out the recessed area. Use sandpaper to flatten the base and the edges after most of the wood has been excavated. Check that the metal inlay piece fit.

Sand the edges of the inlay to create a wedge which is narrower at the bottom than the top. Use fine grit sandpaper on the inlay.

Source: https://www.tapatalk.com/groups/paleoplanet69529/how-to-make-simple-inlays-t33591.html

Now that the metal inlay is ready to be fit, prepare the glue or adhesive that you wish to use. Mix the adhesive with wood dust from the sandpaper so you can cover gaps between the inlay and the wood. This method will look as if the metal inlay has been part of the wood all along.

Step #6

Apply the glue or epoxy on the inlay and stick it on the recessed area. Help the metal stick to the wood by lightly tapping the inlay. Now the inlay has been placed in the wood like the wood was able to wrap itself on the metal piece.

Source: https://www.tapatalk.com/groups/paleoplanet69529/how-to-make-simple-inlays-t33591.html

Step #7

Make final adjustments to your project by cleaning off any excess adhesive or glue between the metal inlay and the wood.

Clean off any excess glue between the inlay and the wood. If the inlay appears to be raised above the surface then use sandpaper and sand it down until it is flushed on the surface of the wood.

You may add varnish or stain on wood and polish the metal piece if you wish.

Conclusion

Working on a metal to wood inlay project is easy if you have the best materials, equipment, and tools. Take time working on your inlaying project to get good results. Keep your designs simple to make it easier to work on the inlay. Remember that the design should appear as if it was part of the base all along.

How to Fix Blotchy Wood Stain

There are many kinds of wood out there that can be very diffluent to stain. Words like pine, cherry, birch, and maple are all known to be very hard to stain.

A board that has an attractive again can end up with a dark blotchy area after you have applied strain on it. Whenever you have wood that has grains that are more open then that is also the place where these blotches often come up.

You need to know though that you might find it hard to tell which boards will have this effect.

One of the tests that you can do though is to wipe the board with mineral spirits. The area that is prone to blotching will appear to be darker. If you have already blotches in your wood then you don’t have to fret about it.

You need to know that there are things that you can do in order to correct blocks in your wood. And if you want to learn how to do it then read on this article and we will show you how.

What you need to have:

  • Shellac
  • 320 grit sandpaper
  • Paintbrush

The process

Step #1

If the surface that you have is very blotchy, you need to make sure that you will remove the stain first by stripping it. You can also choose to sand it and even do both and just start over. Apply a wash coat of shellac and then the statement. If you do have a blotching that is not too severe then you can try and glaze it. This will help in softening the contracts between the deeply colored area and the lighter ones.

Image credit: Thrift Diving

Step #2

Once you have the initial stain dry, apply a wash coat of shellac. Let the coat dry and then gently sand it using a 320 grit sandpaper. Always remember to sand lightly. One of the woods that blotches easily is pine. You can begin things by doing the scuff sanding.

Image credit: DIY Network

Step #3

The next thing that you need to do is to brush on a burnt umber or other brownish glazes. If you find that there are excess coating then you can wipe to off gently.

Image credit: Home Guides – SFGate

Step #4

Once you are able to wipe off the excess gently, you will realize that the color that you will have will be more uniform. Lave the coat and let it dry.

Image credit: The Family Handyman

How to avoid blotching

One f the ways to correct blotching is to make sure that you will have no blotching in the first place. You can do this by starting to make a test board with your chosen sealer concentration.

What you need to do next is to stain the entire test board. Let the stain dry and apply another coating. Always remember to do it in one direction only. Repeat the whole process until you are able to find the desired color depth that you want.

You need to know though that applying multiple coats is it really not the best way for you to achieve a deeper color. One of the disadvantages that it will have is that it will take a long time before it will dry. This will, in turn, make the project longer to finish.

There are even coats that will dissolve the stain below it even if it is dry already. This is also the reason why testing is always done in order to achieve a great finish.

Another disadvantage with multiple coats is that it will remove the natural grain of the wood. One of the things that you can do though is to opt for a less concentrated sealer. This might give you a few blotchy appearances but will also help you show the grain better. Many woodworkers find it as a good compromise.

Once you are able to treat your test boards as a fished project then this will help you get a true representation of the final product that you will get. This will show the real color as well as the fins that you want to achieve.

You need to see to it that you will be sending the test board with the same grit that you will be using on the actual project.

After you have achieved your desired color then apply a final clear finish and see how everything turns out. This is also a great time to test the effects of different sheens. You are able to find a number of different sheens from flat to high gloss.

Conclusion

Correcting blotches in your wood stain is into really rocket science. Following these steps will help you correct the blotch stain that you have. One thing that you need to remember though is to always test the products first in order to avoid a blotchy stain on your wood.

How to Prep Wood for Stain

Wood stain is applied to set your finished project. It protects wood from the elements (water and light) and will also keep insects and mold at bay.

For wood stain to work well on wood, you need to prepare the surface carefully using a few simple techniques.

This guide will show you how to prep wood for a coat of wood stain.

Preparing wood for staining

Get to know the different techniques to prepare wood for staining. After this brief tutorial, you will be able to stain wood successfully minus any chipping, shedding or cracking.

Things that you will need

  • Wood to work on
  • Sandpaper or power tools (#120 to #150 grit)
  • Sanding blocks
  • Tack cloth

Using sandpaper or power tools

One of the most important ways to prep wood for staining is by sanding. Sanding will remove ugly superficial marks, old and chipped paint as well as old varnish.

Take note that sandpaper comes in a variety of grits or grades and this is according to the number of sand granules per square inch of the paper.

The higher the grade, the finer the sandpaper is. Sandpaper with a lower number means that the surface is coarser. Usually medium to fine grades are used for refinishing furniture as well as fine antiques.

Coarser grades under #100 can damage a fine wood finish, therefore, it is not used for finished wood. Medium grits like #120 and #150 are perfect for removing old finish and may also be used to remove old finish or ugly marks and scratches.

You may use sandpaper with finer grits like #220 for final light sanding before applying a stain to the wood surface.

How to sand wood

Step #1

Take the appropriate sandpaper grit for your wood. Cut it into fourths and fold these into small pieces. The piece is just enough to be held with just three fingers.

Source: http://makeshoppgh.com/2015/07/30/shop-tips-sandpaper/

Step #2

You can make a sanding tool by wrapping a piece of sandpaper around a block of wood. This will fit the palm of your hand making it easier to hold sandpaper for heavy sanding.

Source: https://indiandiy.blogspot.com/2014/01/finishing-finishing-without-pricey.html

Step #3

Instead of just any block of wood, you may also use a contoured sanding block. This is specially shaped to be held easily and will also let you attach and detach sandpaper.

Source: http://www.nar.org/educational-resources/model-rocket-building-techniques/the-best-tools/

Step #4

Always sand with the grain and never perpendicular to it. Look for the pattern of the wood grain by inspecting the piece of wood you are working on. Position the piece so that the surface that you are working on is horizontal. It should also be at a comfortable height.

For a clean finish, hold the sanding block flat and grasp it as you apply even pressure to move it back and forth towards the grain. Never exert so much pressure on the corners because this can result in ugly gouges or depressions on the wood surface.

Source: http://www.wordfuss.com/2017/07/28/things-to-be-careful-with-when-painting-furniture/282_2_1/

Always remove dust

Source: https://www.hgtv.com/design/rooms/kitchens/how-to-clean-a-wood-kitchen-table

Dust is the number one enemy of staining and finishing wood. If you don’t get rid of dust and residue, these can fly about and land on the surface of your project. You can use dry rags and brushes but damp rags are best in removing dust. Always use a face mask when sanding and removing dust.

Remove dust using a tack cloth. This is a sticky piece of cloth that can remove dust easily. Take the tack cloth and fold this into a smaller piece of cloth. Use this to wipe across the wood surface. Soon the cloth will become filled with dust, hair, and residue. All you need to do is to fold it and wipe with the unused side.

After you have removed all dust and residue, you are ready to stain your wood. No matter what type of stain you use, test it on an inconspicuous area of the wood. If you are staining furniture, test it at the back of a leg. If you are staining wooden floors, test a small amount of stain on an area underneath a rug or furniture.

If the stain tests okay, you can now apply it on the piece. Take note that staining will permanently change the appearance of wood. Be sure to read the manufacturer’s instructions on how to use the stain and to take note of the drying times and if there are curing times.

Conclusion

Prepping wood for staining is a straightforward procedure that involves preparing the surface that you will work on by cleaning and sanding. The stain is applied to enhance the beauty of wood but at the same time protect it from the elements and from other factors as well.